| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Drive Shaft/Propeller Shaft | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F51000X |
| Title: DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 2WD): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL PROPELLER SHAFT ASSEMBLY (for 2UZ-FE)
|
(a) Remove SST from the transmission. SST: 09325-40010 |
(b) Insert the propeller shaft assembly into the transmission.
|
(c) Align the matchmarks on the propeller shaft flange and differential flange. |
(d) Install the propeller shaft assembly to the differential side, and install the 4 nuts.
Torque: 70 N·m (714 kgf·cm, 52 ft·lbf)
2. INSTALL PROPELLER SHAFT ASSEMBLY (for 3UR-FE)
|
(a) Remove SST from the transmission. SST: 09325-60010 |
(b) Insert the propeller shaft assembly into the transmission.
|
|
(c) Align the matchmarks on the propeller shaft flange and differential flange. |
(d) Install the propeller shaft assembly to the differential side, and install the 4 nuts.
Torque: 70 N·m (714 kgf·cm, 52 ft·lbf)
3. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK
|
|